MARKAGE MB • Smoke evacuation damper

• The MARKAGE MB rectangular smoke control damper is suitable for installation in a wall or a refractory duct and has a fire resistance of 90 or 120 minutes, depending on the application and installation. The damper is available in a wide range of dimensions
• The MARKAGE MB smoke control damper has an MA and HOT400/30 classification which ensures that in the event of a fire, the damper blades can still change position during the first 30 minutes. In this way, smoke control can be adjusted during or after a fire
• Smoke control shutters and dampers are suitable for use in ventilating protected lobbies, venting to shafts either naturally or mechanically. They open to evacuate smoke in emergency situations whilst maintaining fire resistant integrity in standby position

• can be activated with a bus communication module
• large dimensions
• superior air tightness (tested at 1500 Pa)

• large number of installation options
• version available for dry installation
• for indoor use

• compliant with EN 12101-8
• tested according to EN 1366-10 and EN 1366-2

• IXI-R1:Universal field module to control and monitor motorised fire or smoke extraction dampers

through a Modbus, BACnet or analog connection. The field module is supplied mounted

on the fire damper

• KITS BP FM - Base plate for a bus communication module
• VS - Mounting brackets for vertical suspension
• HS - Mounting brackets for horizontal suspension
• JK BAT - Mounting hardware for combining multiple dampers into a battery