CHARMO R290 • Split unit inverter

Inverter heatpump split wall models offer the best combination of comfort and environmental friendly solution for heating and cooling of homes, offices and shops

Inverter mono-split wall-mounted system providing heating and cooling for rooms with low heat loss/cooling loads, operating with the environmentally friendly refrigerant R290. It is designed to operate at outdoor temperatures ranging from -25 to 30⁰C in heating mode and -15 to 50⁰C in cooling mode

The system is equipped with fully inverter components, with special attention given to safety. A dedicated sensor is integrated to monitor refrigerant leaks, while a control logic has been developed to minimize all risks in case of refrigerant leakage

Energy efficiency is guaranteed thanks to the inverter technology used in all sizes, as well as the environmentally friendly refrigerant R290, which has almost zero impact on the environment (GWP < 3). At the same time, its quantity is significantly lower compared to widely used refrigerants such as R32 and R410a, which further reduces its environmental impact - even in the event of a full discharge

Built-in Wi-Fi module
Electrical vertical and horizontal movement of air louvres
I-FEEL - temperature sensor in remote control
AUTOCLEAN IDU - cleaning the heat-exchanger of the indoor unit
X-FAN - drying the heat-exchanger of indoor unit during summer and minimising the risk of unpleasant odours due to condensate forming
Power limiting operation - limiting the power input of indoor unit
TIMER
8℃ Heating during winter
Energy saving function during summer
Locking buttons
Night mode
LIGHT - turning on and off the display of indoor unit
TEMP - measuring indoor temperature

Model			GWH09ATCXB-K5DNA1B	GWH12ATCXB-K5DNA1B
Output	Cooling nominal capacity (Min-Max)	kW	2.65 (0.70 - 3.00)	3.20 (0.70 - 3.60)
Output	Heating nominal capacity (Min-Max)	kW	2.95 (0.70 - 3.50)	3.40 (0.70 - 4.50)
Nominal power electric consumption	Cooling	W	660	965
Nominal power electric consumption	Heating	W	670	810
Output	Pdesign (A)	kW	2.70	2.80
Seasonal efficiency	Cooling SEER	W/W	8.4	7.5
Seasonal efficiency	Heating SCOP	W/W	4.8	4.6
Energy label	Cooling		А ++	A++
Energy label	Heating		А ++	A++
Power supply (Outdoor/Indoor unit)			1 Ph / 220-240V / 50 HZ
Current	Cooling	A	3.20	4.50
	Heating	A	3.20	4.00
	Max	A	6.20	7.20
Indoor unit	Air flow volume	m³/h	720/610/530/500/440/400/350/310	720/610/530/500/440/400/350/310
	Sound Pressure Level	dB(A)	45/41/38/36/34/32/26/-	45/41/38/36/34/32/26/-
	Dimensions	mm	835x275x200	835x275x200
	Weight	kg	8.50	8.50
Outdoor units	Air flow volume	m³/h	2200	2200
	Sound Pressure Level	dB(A)	53	53
	Dimensions	mm	732/555/330	732/555/330
	Weight	kg	26.5	26.5
Connection Pipe	Outer Diameter of Liquid /Gas Pipes	mm	Ø6.35/Ø12.70	Ø6.35/Ø12.70
	Max Distance Length	m	15	15
	Max Distance Height	m	10	10
Operation Ambient Temperature Range	Cooling	°C	-15°C ～+50°C	-15°C ～+50°C
Operation Ambient Temperature Range	Heating	°C	-25°C ～+30°C	-25°C ～+30°C
Refrigerant	Type	-	R290	R290
	Charge	kg	0.27	0.31
	Additional charge		Not allowed!	Not allowed!
Air switch capacity		А	10	10
Minimal electric wire requirements		mm²	3х1.0	3x1.0

Requesting information. Please wait a moment...




	Introduction

A	Products for air diffusion

B	Valves & volume control dampers

C	Air duct systems

D	Air duct components and accessories

E	Fireproof products

F	Insulating products

G	Air filters

H	Kitchen ventilation

I	Fans & ventilation systems

J	Air handling, air conditioning and heatpumps

	J01	Air to Water Heat Pumps

	J02	Air conditioning and heatpumps

	J03	Air Handling Units, chillers & fancoils

	J04	Condensate pumps

	J05	Air conditioning accessories

	J06	Air cleaners

	J07	Dehumidifiers

	J08	Steam humidifiers

	J09	Heating and cooling batteries

	J10	Air curtains

	J11	Controllers

	J12	Servomotors

	J14	Water circulation pumps

	J15	Automation