The HL8102 series digital temperature controller is a microprocessor-based controller with digital LCD display. It is used to control room temperature in industrial, commercial and residential environment via controlling electric modulating valve or damper with 0-10Vdc (4-20mA) signal or floating control
Application
Temperature control for variable air volume (VAV) box
Temperature control for VAV with reheat box
Modulating/floating valve
Modulating/floating damper
Constant temperature control
Specifications
Digital display of sensing temperature and user selected temperature setting on demand
Proportional plus integral (PI) advanced control with analog signal output
0-5 Vdc, 1-5 Vdc, 0-10Vdc or 2-10 Vdc signal and floating output
Direct/reverse acting output
Output limited for overload protection
Energy-saving mode - external energy savings input (ESI) from card key or occupancy sensors
Adjustable unoccupied setpoint for heating and cooling mode control
Sleep mode control
Model available for build-in or remote sensor (RS) function
Remote control (RC) output for intelocking on/off control application
Non-volatile memory (EEPROM) retains user settings during power loss
°F or °C display unit
Adjustable maximum and minimum setpoint limits
Adjustable deadband (some dual outputs model)
Control off output when system switch at "Off" position
RS-485 network interface
Modbus RTU protocol
Mounting
Temperature controller mounted directly onto a wall or standard junction box