PRODUCTS
EShop-number
Password
Welcome to Cairox Bulgaria

TRP102 • Positioner

  • Positioner

  • The positioner TRP102 is used for the remote control of modulating actuators or for use as a minimum positioner (providing a bottom limit for the output  signals from modulating controllers). The control range is 0 ... 100% of the rotation of the actuator

Application

  • The positioner receives its power supply through terminals 1 and 2. The position to which the rotary knob is turned produces a proportional control signal Y of either 0...10 VDC or 2...10 VDC at the output (Terminal 3) and thus a proportional change in the position of the actuator between 0...100%. The change-over from 2...10V- to 0...10V- is effected by means of a slide switch on the p.c.b.

Specifications

  • Power supply: 24V~ ± 20%; 50/60 Hz
  • Control signal: 0...10V-; 2...10V (switchable)
  • Control range: 0...100%
  • Connection: terminals (1.5 mm2)
  • Power output: for up to 10 motors
  • Input Z
    • Over-ride control (Y=100%): link between terminals 2 and 4
    • Minimum position setting: from controller to terminal 4
  • The rotation of the knob can be limited mechanically
CopyrightEthics policyDisclaimerDuct calculator

Requesting information. Please wait a moment...